MC-900/901 Econo Motorcycle Cover

Reference:

Condition: New product

MC-900/901 Econo Motorcycle Cover

More details

Available on Ordering

Send to a friend
Send to a friend

MC-900/901 Econo Motorcycle Cover
MC-900/901 Econo Motorcycle Cover
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Share on Facebook!
Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

More info

Made from durable but soft PVC
All seams are heat welded making this cover 100% waterproof
Fully ventilated using our exclusive “Cool-Vent“ System
Front and Middle grommets for safety tie-down
Exclusive 1 year warranty
Graphite Black (900), Sonic Gray (901)
Sizes to fit every model L / XL / XXL

*Cover is not intended for trailering.

**Do not put cover on bike with hot pipes or parts

Installing your cover

Installing your new Nelson Rigg cover is easy! To help, there is a "Back" tag that is sewn on the inside of the cover located at the rear tire. Once you’ve identified the back of the cover, you may start to secure the cover around the front tire first, then pull the cover over the top of the handlebars and secure around the rear tire last. *Note: the elastic around the bottom of the cover will hold in place under normal weather conditions. Be cautious when installing the cover on the vehicle which has been just driven to ensure the material does not come into contact with hot parts or pipes.

Removing the cover

Lift both ends of the cover from under front and rear tires and fenders.
Pull up the front part of cover over handle bars and mirrors then pull up the rear of the cover over the seat.
Make sure the cover is dry and clean before packing inside of the storage bag.

Cleaning

The following information is only a recommendation. All cleaning products and methods should be tested on an inconspicuous spot before using it on the original stain/soiling.

For a light hand wash, remove any loose dirt and then dilute a mild liquid detergent in cold to lukewarm water. Lightly clean your cover with a sponge or soft brush. It is ok to submerge the cover in a bucket or container of water. Finally, rinse thoroughly until all soap residue is removed. Allow your cover to air dry. We recommend to NEVER place a cover in a washing machine or an automatic dryer.

For a deeper clean, like removing stubborn stains or mildew:

Mix a cup of chlorine bleach with half a cup of mild detergent with a gallon of water.
Clean the stain with a soft bristle brush and allow the mixture to soak into the fabric for several minutes, then rinse thoroughly until all cleaning agent is removed and the water runs clean.
You can repeat the cleaning process if the stain is not completely removed.
Allow your cover to air dry.

Warranty

The warranty on a Nelson Rigg Motorcycle Covers is valid from the original date of purchase.

(Warranty period is indicated in the Description box under each cover model)

Nelson Rigg USA guarantees your product to be free from any manufacturing defects. We warrant to the purchaser that correction to any manufacturing defects in material or workmanship by either repairing or replacing the product free of charge within the valid warranty period. The warranty does not cover normal wear and tear or stains from dirt or pollutants. The cover must be properly utilized and maintained from the time of purchase.

Vehicle to be dry before covering.
Do not put cover on with hot pipes or parts.
We recommend waiting 10 minutes for pipes/parts to cool down.
Do not use cover while towing vehicle.

We are not liable for repainted surfaces or lacquer paint. Repainted surfaces should not be immediately covered. It is best to check with your paint body shop for the recommended "cure" time. Covering before the cure time has been reached may cause damage which is not due to the cover but due to the new paint.

To initiate a claim for a product still covered under the manufacturer’s warranty, please carefully review our warranty policy on our Warranty Information page and then complete the claim form. After your claim is submitted, a representative from our warranty department will review your request and respond with instructions for returning the defective cover to us for repair or replacement, pending our evaluation. Nelson Rigg USA will cover the cost of shipping the repaired or replacement cover back to you.